Feature:
1.Portable Mini Fiber laser marking machine is the 3th-generation laser marking machine which is manufactured by the most advanced laser technology in current of the world.
2.The quality of laser beam is very good(near to the limit of diffraction,exporting TEM00 fundamental transverse mode, M2 near to 1,expanding angle of laser beam is only 1/4 of the diode laser marker),Therefore it is very suitable for delicate marking.
3.With high repeat frequency of the pulse,power output steadily,energy surge of single pulse is lower than 1%,BML-F can achieve high speed marking,and control the depth and shape of the facula .
4.The processing speed of BML-F is 2-3 times than the traditional marking machine.
5.Air cooling,the size of the machine is very small.
6.Long life,ultra-low power consumption,the conversion efficiency is more than 30%,the unit power of the machine is no more than 0.5kw!
7.With red light positioning device accurately indicates the location of the processing of the laser head, eliminate the trouble about manual positioning.
Model | CF200 | |||
Laser Power | 10W | 20W | 30W | 50W |
Laser Wave length | 1064nm | |||
Q-frequency | 20KHz~30KHz | |||
Divergence | 0.3mard | |||
Marking Range | 100*100mm/175mm*175mm/200mm*200mm/300mm*300mm | |||
Minimum Line Width | 0.02mm | |||
Minimum Character | 0.15mm | |||
Marking Depth | 0~0.5mm | |||
Engraving Line Speed | ≤7000mm/s | |||
Repeatability Accuracy | ±0.001mm | |||
Beam Quality | M2:1.2~1.8 | |||
Marking Format | Graphics, Text, Bar Codes, Two-dimensional Code, Automatically Marking theDate, Batch Number, Serial Number, Frequency,etc. | |||
Graphic Format Supported | bmp,jpg,gif,tga,png,tif,ai,dxf,dst,plt,etc. | |||
Working Voltage | 220V±10%/50Hz/4A | |||
Unit Power | <0.5kw(20W) | |||
Use of the Environment | Clean and Dust Free or Dust less | |||
Working Condition:Humidity | 5%-85%,Free of Condensed Water | |||
Laser Module Life | >100000hours | |||
1.What kind of material does this machine work on?
This machine is suitable for fine marking of monocrystalline silicon wafer, IC grain, sapphire, plastics, leather, metal, glass, LCD screen, thin ceramic and the special material. It is popular for precise marking.
2.What power does the buyer need?
This is depend on the material and the working speed the buyer need.
3.What is the warranty and service.
Machine warranty is two years and we support service on 24-7.You can find us easily on email ,whatsapp, wechat ect.